Dining Chair Foot Pads
Glides are those often-invisible bits at the bottom of chair legs that provide protection for the chair leg and, probably more importantly, the floor below them. Glides are fixed to wooden chair legs with nails, screws or glue; on metal chair legs they tend to be inserts or caps – there are pictures of a cross-section of glides further down this article. Why glides matter All glides can wear out and glides can sometimes fall off chair legs. Worn-out glides or missing glides can quickly damage a floor. Chair glides should be regularly checked. Worn out glide has damaged flooring Hard plastic or nylon glides are generally the best choice for hospitality environments , being suited to most floors; they usually last for many years, often for the whole lifetime of a chair. Hard plastic glide on chair leg Rough, textured or uneven floors Rough floors or floors that can 'catch' chair legs that are being slid across them are a danger to not only glides, but also the chairs themselves. Furniture that goes on this type of floor needs to have the most robust plastic/nylon glides, but also the chair frame need to be particularly strong. Noisy floors The most typical reason not to use a plastic/nylon glide is that they can be noisy and felt glides seem to be a better solution - they are softer and may be quieter and smoother on some hard floors. Felt glide on chair leg BUT felt glides tend to be quicker to wear and are less easy to fix to the end of a chair leg, so may be knocked off more easily by resistance on a rough or textured or uneven floor Felt glides will not slide easily across some surfaces, mainly carpets, so are inappropriate for these as well as hard floors that have a partial covering of rugs, for instance. A glide that sticks to a floor surface can lead to damage to a chair. Soft floors If the floor is soft (including parquet, lino, and some softer woods), a glide needs to spread the weight of the chair. For soft floors, glides need to be specified carefully; this rules out chairs with thin legs, if a wider glide cannot be separately specified. When can glides be specified separately to the chair itself? Usually glides are fitted as part of the process of construction and there is no choice. However some chairs (typically but not always chairs with wooden legs) can be specified with non-standard glides. Standard glides will tend to be better connected to the chair leg than non-standard glides. Clattering chairs Some chairs can clatter across a hard floor; for some metal-framed chairs, this can be because the screws connecting the frame to the seat and back are loose; but it could also be because of the hard glides. Magiglides Magiglides are a patented type of glide, combining a Teflon-like underside (in contact with the floor) and a hard rubber top (to absorb vibrations). They are screwed to the chair and allow it to glide better across most surfaces, but particularly carpets. In some circumstances we can add Magiglides to chairs (they are a slightly more expensive option that a standard glide). We will send replacement worn-out or missing nylon (nailed in) glides to our customers, free of cost, on request. The following video shows how to replace a nailed in glide. 
Replacing worn-out or lost glides
Source: https://info.thecontractchair.co.uk/blog/chair-glides-for-hospitality-furniture
0 Komentar